C35 Positive Displacement Flow Meters

We are Manufacturer, Supplier, Exporter, Services Provider of C35 Positive Displacement Flow Meters - C35 PD Flowmeter and our setup is situated in Pune, Maharashtra, India.

The C35 PD Meter is a sturdy, compact & highly accurate Positive Displacement Flow Meter. Proven design & material selection make it possible to use it extensively for almost every sector of industry & process control. This is fast moving products in Construction, process, mining industries.

Principle Of Operation

The product enters the meter through the inlet manifold and causes the rotor to revolve by pressure on the blades. The proximity of the rotor to the casing forms an efficient seal, whilst the profile of the casing ensures that the blades are guided through the measuring crescent.

The vane blades divide the liquid into segments, the liquid segments are counted as they are displaced, giving a positive rotary motion to the rotor.

The rotor spindle transmits the drive through a pressure tight lip seal in the meter front cover to the calibrating mechanism, which calibrates the meter output for a correct counter readout.

Design Features
  • High accuracy
  • Low pressure drop
  • Stepless calibration adjustment
  • Wear compensating vane design
  • Mechanical or electronic readout
  • Suitable for a wide variety of liquids
  • Batching, blending and dispensing in chemical and process industries, petroleum companies, paints, solvents, pharmaceutical and other fields
  • Container filling
  • Tank truck / rail wagon unloading
Positive displacement rotary vane
40 mm NB
50 mm NB
Flow Range
35 to 350 lpm (40 mm NB)
45 to 450 lpm (50 mm NB)
(Maximum flow rate can be uprated by 30% for aircraft refuelling with ATF)
Meter Hand of Discharge
(when facing the counter)
Right hand entry left hand delivery
Left hand entry, right hand delivery
Positive gear train
Mechanical - 5 digit reset, 8 digit non-reset totaliser, weather-proof Veeder Root 7887
Electronic - 5 digit reset, 8 digit non-reset totaliser, flame-proof
Better than ±0.10% (In accordance with IS:2801)
Better than ±0.02%
100% to 10% of max. flow range
Maximum Working Pressure
10.54 kg/cm2
Temperature :

Upto 70°C (Standard)
Upto 200°C (Special)
Viscosity :
0.5 CST to 200 CST
(Consult factory, for liquid viscosity above 200 CST)